House Rewiring Cost in Fort Myers: Full and Partial Rewire Prices (2026)

Nobody wants to rewire a house. People do it because an insurance carrier forced the issue, a 4-point inspection failed, or the wiring itself started announcing problems. Here’s what rewiring actually costs in the Fort Myers area in 2026, when you need a full rewire versus a cheaper fix, and why so many Southwest Florida homes from the 60s and 70s are on borrowed time.

The Short Answer

A full rewire of a typical 3-bed/2-bath single-story home in the Fort Myers area generally runs $8,000 to $15,000+, depending on square footage, attic access, and whether the panel needs replacing at the same time. Partial rewires — one circuit, one addition, one problem area — scale down accordingly and are often quoted flat. Larger homes, two-story layouts, and plaster walls push the top of the range.

If you’d rather spread a rewire out, we offer electrical financing through GoodLeap. It’s a soft credit check to apply, and there’s no penalty for paying it off early.

What Drives the Number

  • Access — open attic and crawl spaces keep costs down; furred-out block walls and vaulted ceilings raise them
  • Panel condition — if the panel is going too, bundling it saves real money versus two projects (see our panel cost guide)
  • Drywall repair — some openings are unavoidable; who patches and paints affects the total
  • Permits and inspections — rewires are permitted work, always; budget for it and be suspicious of any quote that skips it

Aluminum Wiring: The Southwest Florida Special

Thousands of area homes built between the mid-60s and mid-70s were wired with aluminum branch circuits, and Florida insurers have spent the last decade refusing to renew policies on them. You have three real options: a full copper rewire (the permanent fix), COPALUM or AlumiConn connector remediation at every device (the insurer-accepted middle path, typically a fraction of rewire cost), or shopping for one of the few carriers that still tolerates it (a strategy with a shelf life). We do the first two and can talk you through which makes sense for your house and your policy.

Signs the Wiring Is Actually Failing

Frequent breaker trips across different circuits, outlets that spark or sit loose, flickering that follows appliance use, two-prong outlets everywhere, cloth-insulated wiring in the attic, or that faint fish-smell of overheated insulation. Any one of these is worth an inspection. Several together is how rewires start.

Rewiring Questions We Hear Most

Does insurance ever pay for rewiring?
Rarely for the rewire itself — carriers treat it as maintenance. Where insurance matters is the other direction: rewiring (or remediating aluminum wiring) is often the only way to keep or get coverage on an older home.

Do I have to move out during a rewire?
Usually not. We work room by room and keep power on to the parts of the house we’re not in. Kitchens are the most disruptive stretch, typically a day or two.

Can I rewire in stages?
Yes — by circuit or by area, worst first. It costs somewhat more in total than one project, but it spreads the spend and every stage is permitted and inspected on its own.

For the broader pricing picture, start with our electrician cost guide, or see the electrical wiring service page.

Ready for a straight answer on your house? Call 239-372-9426 or send a request through our contact form.